Scubapro id

Got something to say but don't know where to put it? Post it here!!

Scubapro id

Postby sugee » Mon Apr 07, 2014 10:08 pm

Is this a balanced MK10? http://www.trademe.co.nz/Browse/Listing ... =713117249. What do you guys think about this?

I tried matching it from here to my best http://www.scubapro.com/en-GB/AUS/regul ... e-eng.aspx


Sent from my iPad using Tapatalk HD
User avatar
sugee
Member
 
Posts: 34
Joined: Sun Mar 16, 2014 5:11 pm

Re: Scubapro id

Postby ChuckyBob » Mon Apr 07, 2014 10:27 pm

No, its a MK2 or similar ( MK200??). MK10 has the yoke/DIN mounted off the side not the end.

The 1st stage is a 108 and the gauges read in PSI and feet.

Nothing worth buying there in my opinion.

Look out for a chrome 109 or 156 second stage. They can be had for cheap on ebay. Very good regs. Or an old G250 ( not G250hp). These are a progression from the 156 into a plastic body. They will perform as good as any currently available 2nd stage.
User avatar
ChuckyBob
Member
 
Posts: 1288
Joined: Fri Apr 03, 2009 1:51 pm
Location: over here.

Re: Scubapro id

Postby ChuckyBob » Mon Apr 07, 2014 10:32 pm

User avatar
ChuckyBob
Member
 
Posts: 1288
Joined: Fri Apr 03, 2009 1:51 pm
Location: over here.

Re: Scubapro id

Postby sugee » Tue Apr 08, 2014 4:05 pm

Yeah looking at it again it looks more like 3rd gen MK3 SPEC? Which apparently is not a balanced one. Oh well I'll keep on the lookout then.

ChuckyBob wrote:No, its a MK2 or similar ( MK200??). MK10 has the yoke/DIN mounted off the side not the end.

The 1st stage is a 108 and the gauges read in PSI and feet.

Nothing worth buying there in my opinion.

Look out for a chrome 109 or 156 second stage. They can be had for cheap on ebay. Very good regs. Or an old G250 ( not G250hp). These are a progression from the 156 into a plastic body. They will perform as good as any currently available 2nd stage.
User avatar
sugee
Member
 
Posts: 34
Joined: Sun Mar 16, 2014 5:11 pm

Re: Scubapro id

Postby somethin fishy » Tue Jun 17, 2014 6:43 pm

I brought these... Pretty sure it is a mk3 spec and 108 regulator... Date stamp on the hose of second stage is 87, which would tie in with when they were in production...

They look like they are brand new...

Not sure what I will use it for, or why I brought it either! Does look pretty...
Andy Stewart
User avatar
somethin fishy
Member
 
Posts: 282
Joined: Mon Sep 22, 2008 10:00 am
Location: Northlander in Auckland

Re: Scubapro id

Postby sugee » Thu Jun 19, 2014 11:24 pm

Oh the one on trademe? I ended up buying a poseidon at the end and been happy since
User avatar
sugee
Member
 
Posts: 34
Joined: Sun Mar 16, 2014 5:11 pm


Return to All Things Diving

Who is online

Users browsing this forum: No registered users and 2 guests

cron